SPECIFICATIONS:

8.5" Addison Databend Tube Bending Machine DB220A

Capacity:
Tube outside diameter (max) ...........	220mm / 8.66"
                      (min) ........... 75mm / 2.95"
Tube wall thickness (max) ............. 12.7mm / .5"
Centerline radius (max) ............... 1000mm / 39.37"
                  (min) ............... 100mm / 3.93"
Bend arm rotation C axis .............. 193	deg	MAX

Length of tube over the mandrel rod into the collet	
  Y axis (max) ........................ 6000mm / 236.22"

Length of tube into the collet before last bend -
subject to tooling limitations (min)...	1100mm / 43.30"

Tube working height ...................	1380mm / 54.33"	

Tube height from tooling platform:
	Lower ............................. 95mm / 3.74"	
    Middle ............................ N/A	
    Upper .............................	N/A		
Mandrel retraction stroke ............. 1400mm / 55.11"
Follower slide stroke ................. 1450mm / 57"	
Clamp slide stroke - direct acting ....	375mm / 14.76"
Reaction slide stroke ................. 480mm / 18.89"	
Flange outside diameter (max) .........	350mm / 13.77"

Flange offset from the standard tube end datum
	Primary	........................... 118mm / 4.64"	
    Mid. .............................. 143mm / 5.63"	
    Front ............................. 168mm / 6.61"	

Axis specification:

Y Axis Feed Rate ....................... 5.4 M/min.
B Axis Rotate .......................... 1.25 rpm
C Axis Bend	............................ 0.5 Degrees
X Axis Radius ..........................

Hydraulics:
Hydraulic tank capacity	................ 1315 litres / 347 Gallons


Dimensions:
Overall length to the rear from tool post: 11940mm / 470"
Bend arm radius ( clamp out ): 3075mm / 121"
Length forwards from tool post:	800mm / 31.49"
Length of reaction arm - at MAX. center line radius from Y axis 
center: 3440mm / 135.43"
Overall width:	4075mm / 160.43"
Overall height:	1772mm / 69.76"
Machine weight:	37200 Kg / 82,000 lbs. (approx.)
Electrics: 440 Volt, 3 Phase, 60 Hz

Addison Databend Tube Bending Machine



PRICE....................: ${please call for price}